Yes, we do we just have it under a different part number. It is the MORryde X-Factor Crossmember for Standard Frame Hangers item # MR33WR. This is the crossmember that works with the CRE 3000 equalizer. view full answer...
We do offer a few of the "triangle" shaped shower pans. We have the # LC325246 which is 27" long and 27" wide and 10-7/8" tall. We also have the # LC209795 which is 34" long and 34" wide and has a 5" rise. Both of these have a drain located in the center.
I have included diagrams of both shower pans below for your reference. view full answer...
If by interchangeable you mean you can swap them out with each other then yes they are, but they do not take the same parts.
Both of these (# V3094-601-00C & # V2094SP-28) roof vents are going to require the same mounting space (14-1/4" wide x 14-1/4" long), have similar 100 CFM 12V fans, and both units have manual lift dome designs. view full answer...
Hey Michael, thanks for reaching out!
How wide is the slide out on your 2022 heartland North Trail 28RKDS? I tried looking up the specs online but I wasn't able to locate anything about it. If you can measure the width of your slide out I can make a recommendation for you!
Attached is a photo demonstrating how to measure your slide out. view full answer...
I am sorry but we do not carry the Duo Form brand. I can't say that brand is something I am familiar with. Are they RV cargo slides? Because we do carry the MORryde cargo slides which may be similar. Ther are available in quite a few sizes, with the most popular being something like the 90" x 29" 2-way slide # MR69FR. The link below will show you our full selection of the MORryde cargo slides. view full answer...
The Gustafson RV Wall and Pendant Light Shade # 277-000474 is a frosted glass. We also have white listed as it does appear as white in color due to the frosted effect. view full answer...
It sounds like you're saying you have 12V when testing the 7-way on your vehicle. There can be some voltage lost heading back to the brakes but it shouldn't be something minimal, not down to 7.5V. More than likely there is a wiring issue. The easiest thing to do is go ahead and replace the brake output wire with 10 gauge wire like # 10-1-1. You can also double check your ground and make sure it is secure on a clean, bare-metal surface.
One way or another I would replace the brakes if... view full answer...
The Go Power Lithium RV Battery # 34282738 has a 100-amp hour capacity. You will need to compare this to the current flooded batteries you have installed to determine what increase in capacity will be. Whatever the increase in amp hours is will be the amount of capacity you are increasing.
When you do switch to lithium batteries you will only need to change the charge profile on the Go Power PWM Solar Charge Controller that came with the Kit.
If you choose to move to the 2,000 Watt... view full answer...
Hey Edward, I don't have the exact info on what your 2011 Big Horn would have came with but if what you have now is has a bulb that is 3-3/16 inches wide and looks like this style it would work. That's really the best way to find out what you need as unfortunately RVs aren't like cars that have every little replacement part listed. view full answer...
Thank you for all of the information!
While we don't have any stereos designed specifically for surround sound, we do have the systems like the iRV Stereo # 292-101809 that you referenced which have 6 speaker outputs that are built for a 3-zone system (2 front, 2 middle, 2 rear) as well as subwoofer outputs. Surround sound systems tend to have their own output system so you should only need provisions for the left/right sound and the sub for your surround sound system to operate properly.... view full answer...
Yes, we do! To add a hitch to your 2024 Honda Accord you will need the Draw-Tite item # DT86PR. This hitch is custom fit and bolts to your Honda with included hardware. It is a class I hitch with a 1-1/4" receiver.
If you are planning on towing you will also need a wiring harness item # 118776 and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball. view full answer...
Hi Charlie,
When it comes to trailer tongue mounted bike racks there really isn't much a of selection aside from the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 or using the Stromberg Carlson # CC-275 to mount a bike rack above the propane tanks. The Jack-It mounts to the trailer jack so depending on the style you have on the trailer you might run into compatibility issues. This rack can haul up to two bikes and has a per bike capacity of 40lbs.
The # CC-275 only clamps to the... view full answer...
Well Steve, since the SumoSprings Trailer Helper Springs # SS26MV will not fit spring plates wider than 4-1/4" your best option is going to be to simply replace your spring plates. I believe your 2022 Bighorn 3970FB is going to have a 3" diameter axle so 4 of the Plates # TRTP300175 would allow you to bolt up the SumoSprings. view full answer...
Hey Pablo,
The Replacement Lippert Correct Track Weld-On Axle Hanger # LC303918 only comes with slots because it's designed to work with the Correct Track system. What you have is likely OEM only so an exact match would need to be purchased directly from the trailer manufacturer if you wanted to have both the slot and single hole. view full answer...